t echnical data sheet tnc 50 ? bulkhead jack solder end 56k508- 200n5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d - 84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18 -0 email : info@rosenberger.de page 1 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/0 8 .1 3/6.1 all dimensions are in mm; tolerances according to iso 2768 m - h interface according to iec 60 169 - 17, mil - prf - 39012, din en 122200 documents panel piercing b 1 material and plating connector parts material plating center contact cube aurodur?, gold plated outer contact brass flash white bronze over silver(e.g. optargen?) dielectric ptfe gasket silicone gasket nbr
t echnical data sheet tnc 50 ? bulkhead jack solder end 56k508- 200n5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d - 84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18 -0 email : info@rosenberger.de page 2 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/0 8 .1 3/6.1 electrical data impedance 50 ? frequency dc to 10 ghz return loss 20 db, dc to 2.5 ghz 18 db, 2. 5 to 4 ghz insertion loss 0.05 x [ghz] f db, dc to 4 ghz insulation resistance 5 x10 3 m ? center contact resistance 1.5 m ? outer contact resistance 1 m ? test voltage 1500 v rms working voltage 500 v rms power handling (at 20 c, sea level, vswr 1.0) 80 w @ 2 ghz - - interface only - - mechanical data mating cycles 500 center contact captivation: axial 15 n coupling test torque 1.7 nm coupling torque (recommended) 0.46 nm to 0.69 nm tightening torque hex nut (recommended) 6 nm environmental data temperature range -25 c to +110 c thermal shock mil - std - 202, method 107, cond ition b corrosion mil - std - 202, meth od 101, cond ition b vibration mil - std - 202, meth od 204, cond ition b shock mil - std - 202, meth od 213, cond ition g moi sture resistance mil - std - 202, meth od 106 degree of protec tion iec 60529, ip68 1 bar / 2 h ( assembled in housing) rohs compliant tooling n/a suitable cables n/a weight weight 11.3 g/pce draft date approved date rev. engineering change number n ame date inge mhlauer 10.08.04 a. gasteiger 06 .11.14 e 0 0 14- 1616 s. huber - siegl 06.11.14 while the information has been carefully compiled to the best of our knowled ge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|
